Planar Masks Machine

PART A Face Mask Machine Technical Details

  • Production capacity: 6000pc/h
  • Yield rate: 99%
  • Power: 220V,50Hz
  • Air pressure: ≥0.5~0.6MPa
  • Main power: 9.5KW
  • Size: 6950mm*3650mm


Material and nose wire feeding、aluminium strip inserting cutting , floding, ultrasonic fusing, slices by Face Mask Blank Making Machine → Distributor → earloop welding by two Mask Outside Earloop Welding Machine.

This machine consist of Face Mask Blank Making Machine,Distributor and Two Mask Outside Earloop Welding machines. Customized production and professional design.

PART B Reference Pictures

1.Face Mask Blank Making Machine

The machine is an automatic machine for producing the main part of the face mask,there is no need labour force because the machine can handle the whole process including feeding, aluminium strip inserting cuttin, floding, ultrasonic fusing, slices.


a.This machine can make the 1~4 levels mask blank according for the customer requirement for a high output.
b.You can adjust the size of the mask blank and the folding location.
c.The computer program control and photoelectric detection make it have a high reliability and low failure rate.


Distributor work with conveyor differential speed control device,driving lever put the mask blanks on the conveyor belt one by one

3.Two Mask Outside Earloop Welding Machine

This machine is use for welding elastics on the both edges of mask blank by ultrasonic,the whole proceed is finished by the automatic.It has a higher output than other earloop machine.


  • Before the producing,the size of the mask blank must be sure to be fixed.
  • The computer program control and photoelectric detection make it have a high reliability and low failure rate.

PART C Equipment Operating Environment Suggestions

  • Ambient temperature requires normal temperature.
  • Humidity should keep in 40%~80%.No condensation,and moisture trap should be installed.
  • Grid supply power:220V,50Hz.
  • Fluctuation of grid supply: ±5%,ground grid must meet the international standard.If the fluctuation is higher than 5%,automation electrical voltage stabilizer and current stabilizer should be installed
  • No intense electromagnetic interference.
  • Fundation amplitude:less than 50um;acceleration of vibration less than 0.05g. Make sure there are no stamping equipment around to influence the amplitude. Equipment environment must keep in no fume and no dust,especially like metal grinding which will produce a large amount of dust
  • Pressure:≥0.6MPa.